fbpx

mobilne boczniki filtracyjne oznaczenie 1

The bypass filtration units manufactured by our company are mobile devices. They are designed for filtering oils in machines and devices of various types (turbine lubrication systems, presses, plastic injection moulding machines, compressors, etc.).
They are manufactured as a series of types:


Mobile bypass filtration unit MBF-I/50-10 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-I/50-10 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed.

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters of the device:

  • nominal pumping capacity: 10l/min
  • recommended volumes of cleaned systems: ≤ 1000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 360,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 230V, 400V
  • supply power frequency 50Hz
  • electric motor rated power: 0,37kW
  • electric motor speed: 1360 obr/min
  • weight: 18kg
  • overall dimensions: 600x320x590mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

budowa bocznika mobilnego 1

 

1. Mesh filter

2. Check valve

3. Electric motor

4. Gear pump

5. Adjustment valve

6. Nonwoven fabric filter (in the filtration chamber)

7. Manometer (quantitative filter contamination indicator)

8. Indpection / drainage plug

9. Electic box

 

The filter elements used:

The following filter elements can be used in MBF-I/50-10 device:

  • WF-W-200/01-225/97
  • WF-W-200/03-225/97
  • WF-W-400/05-225/97
  • WF-W-400/10-225/97
  • WF-W-400/25-225/97

 

Mobile bypass filtration unit MBF-I/100-10 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.

Design and structure of the mobile bypass filtration unit MBF-I/100-10 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed.

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices,
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters of the device:

  • nominal pumping capacity: 10l/min
  • recommended volumes of cleaned systems: ≤ 1000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 2,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 230V,
  • supply power frequency 50Hz
  • electric motor rated power: 0,55kW
  • electric motor speed: 1350 obr/min
  • weight: 35kg
  • overall dimensions: 600x320x590mm
  • functions: filtering, pressure pumping

 

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

budowa bocznika mobilnego 1

1. Mesh filter

2. Check valve

3. Mesh filter

4. Electric motor

5. Gear pump

6. Adjustment valve

7. Nonwoven fabric filter (in the filtration chamber)

8. Manometer (quantitative filter contamination indicator)

9. Automatic air vent

 

 

The filter elements used:

The following filter elements can be used in MBF-I/100-10 device:

  • WF-W-200/01-255/145
  • WF-W-200/03-255/145
  • WF-W-400/05-255/145
  • WF-W-400/10-255/145
  • WF-W-400/25-255/145

Mobile bypass filtration unit MBF-I/200-20 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-I/200-20 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed.

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices,
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters of the device:

  • nominal pumping capacity: 20l/min
  • recommended volumes of cleaned systems: ≤ 2000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 680,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 2,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 400V,
  • supply power frequency 50Hz
  • electric motor rated power: 1,1kW
  • electric motor speed: 1380 obr/min
  • weight: 55kg
  • overall dimensions: 650x650x1100mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

budowa bocznika mobilnego 2

1. Mesh filter
2. Check valve
3. Electric motor
4. Gear pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Inspection / drainage plug
12. Electric box

 

The filter elements used:

The following filter elements can be used in MBF-I/200-20 device:

  • WF-W-200/01-470/145
  • WF-W-200/03-470/145
  • WF-W-400/05-470/145
  • WF-W-400/10-470/145
  • WF-W-400/25-470/145

Mobile bypass filtration unitMBF-I/200-40 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-I/200-40 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions,
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different

Technical parameters of the device:

  • nominal pumping capacity: 40l/min
  • recommended volumes of cleaned systems: ≤ 4000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 400V,
  • supply power frequency 50Hz
  • electric motor rated power: 1,1kW
  • electric motor speed: 1380 obr/min
  • weight: 55kg
  • overall dimensions: 650x650x1100mm
  • functions: filtering, pressure pumping

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

budowa bocznika mobilnego 2


1. Mesh filter
2. Check valve
3. Electric motor
4. Gear pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Inspection / drainage plug
12. Electric box

 

The filter elements used:

The following filter elements can be used in MBF-I/200-20 device:

  • WF-W-200/01-470/145
  • WF-W-200/03-470/145
  • WF-W-400/05-470/145
  • WF-W-400/10-470/145
  • WF-W-400/25-470/145

Mobile bypass filtration unit MBF-I/200-60 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-I/200-60 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed

Urządzenie należy stosować:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters of the device:

  • nominal pumping capacity: 60l/min
  • recommended volumes of cleaned systems: ≤ 6000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 400V,
  • supply power frequency 50Hz
  • electric motor rated power: 1,1kW
  • electric motor speed: 1380 obr/min
  • weight: 55kg
  • overall dimensions: 650x650x1100mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

budowa bocznika mobilnego 2

1. Mesh filter
2. Check valve
3. Electric motor
4. Gear pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Inspection / drainage plug
12. Electric box

 

The filter elements used:

The following filter elements can be used in MBF-I/200-60 device:

  • WF-W-200/01-470/145
  • WF-W-200/03-470/145
  • WF-W-400/05-470/145
  • WF-W-400/10-470/145
  • WF-W-400/25-470/145

 

Mobile bypass filtration unit MBF-I/300-60 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed


Design and structure of the mobile bypass filtration unit MBF-I/300-60 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up
  • oil pumping out with the filtration chamber bypassed.

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Parametry techniczne urządzenia

  • nominal pumping capacity: 60l/min
  • recommended volumes of cleaned systems: ≤ 6000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 400V,
  • supply power frequency 50Hz
  • electric motor rated power: 1,1kW
  • electric motor speed: 1415 obr/min
  • weight: 120kg
  • overall dimensions: 650x750x1280mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

mobilne boczniki filtracyjne6

 

1. Check valve
2. Mesh filter
3. Electric motor
4. Screw pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Chamber drainage vale
12. Electric box

 

The filter elements used:

The following filter elements can be used inMBF-I/300-60 device:

  • WF-W-200/01-920/145
  • WF-W-200/03-920/145
  • WF-W-400/05-920/145
  • WF-W-400/10-920/145
  • WF-W-400/25-920/145

 

Mobile bypass filtration unit MBF-I/300-80 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-I/300-80 allows to use it in three different variants:

  • oils system by-pass filtration (off-line),
  • filtering-assisted oil system topping up,
  • oil pumping out with the filtration chamber bypassed

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions,
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices,
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters of the device

  • nominal pumping capacity: 80l/min
  • recommended volumes of cleaned systems: ≤ 6000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 400V,
  • supply power frequency 50Hz
  • electric motor rated power: 1,5kW
  • electric motor speed: 1415 obr/min
  • weight: 120kg
  • overall dimensions: 650x750x1280mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

mobilne boczniki filtracyjne6

 

1. Check valve
2. Mesh filter
3. Electric motor
4. Screw pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Chamber drainage vale
12. Electric box

 

The filter elements used:

The following filter elements can be used inMBF-I/300-60 device:

  • WF-W-200/01-920/145
  • WF-W-200/03-920/145
  • WF-W-400/05-920/145
  • WF-W-400/10-920/145
  • WF-W-400/25-920/145

 

Mobile bypass filtration unit MBF-II/200-40 is a device designed to removing mechanical impurities from oils used in turbines, compressors, transmissions, hydraulic power systems etc. It can be used also for filtering-assisted refilling or removing (pumping out) oils with the filtration chamber of the system being bypassed.


Design and structure of the mobile bypass filtration unit MBF-II/200-40 allows to use it in three different variants:

  • oils system by-pass filtration (off-line)
  • filtering-assisted oil system topping up
  • oil pumping out with the filtration chamber bypassed.

The unit should be used as:

  • as an independent device filtering oil in lubrication systems of machines and devices operated continuously in special conditions
  • in case of newly purchased fresh oils, for oil filtering when refilling oil systems of machines and devices
  • as an oil-pumping device with the filtration chamber bypassed (e.g. for spent oils)

Mobile bypass filtration units can be manufactured against individual customer orders. In vie of that, the type an configuration of subassemblies mounted in them can be different.

Technical parameters

  • nominal pumping capacity: 40l/min
  • recommended volumes of cleaned systems: ≤ 6000
  • filtered liquid kinematic viscosity coefficient range: 2,0 .. 220,0 mm2/s
  • operating temperature range: 0 .. +80
  • the maximum filter operating range — pressure: 3,0 bar
  • minimum pressure at inlet: -0,05 MPa
  • supply power voltage: 380V,
  • supply power frequency 50Hz
  • electric motor rated power: 2,2kW
  • electric motor speed: 1420 obr/min
  • weight: 120kg
  • overall dimensions: 650x750x1100mm
  • functions: filtering, pressure pumping

The mobile bypass filtration unit is manufactured as a compact structure with all the components mounted on a common carrying frame.

mobilne boczniki filtracyjne6

 

1. Mesh filter
2. Check valve
3. Electric motor
4. Gear pump
5. Adjustment valve
6. Pressure switch
7. Cut-off valve
8. Nonwoven fabric filter (in the filtration chamber)
9. Manometer (quantitative filter contamination indicator)
10. Automatic air vent
11. Inspection/drainage plug

 

The filter elements used:

The following filter elements can be used in MBF-II/200-40 device:

  • WF-W-200/01-470/145
  • WF-W-200/03-470/145
  • WF-W-400/05-470/145
  • WF-W-400/10-470/145
  • WF-W-400/25-470/145

 

Mobilny bocznik filtracyjny MBF-II/300-100 jest urządzeniem przeznaczonym do usuwania z olejów (turbinowych, sprężarkowych, przekładniowych, hydraulicznych i innych) zanieczyszczeń mechanicznych. Może także służyć do uzupełniania filtracyjnego lub usuwania – wypompowywania z pominięciem komory filtracyjnej oleju w układzie, przy którym pracuje.


Budowa i konstrukcja bocznika filtracyjnego MBF-II/300-100 umożliwia pracę w trzech różnych wariantach:

  • filtrowanie bocznikowe układu olejowego (off – line),
  • uzupełnianie filtracyjne układu olejowego,
  • wypompowywanie oleju z pominięciem komory filtracyjnej.

Urządzenie należy stosować:

  • do olejów świeżo zakupionych, filtrując olej podczas napełniania systemów olejowych urządzeń
  • jako urządzenie niezależnie filtrujące olej w układach urządzeń i maszyn pracujących w ruchu ciągłym w specjalnych warunkach,
  • jako urządzenie pompujące oleje z pominięciem komory filtracyjnej olejów przepracowanych.

Mobilny bocznik filtracyjny może być wykonane na indywidualne potrzeby odbiorcy. W związku z tym konfiguracja i rodzaj zamontowanych urządzeń może być różna.

Parametry techniczne urządzenia

  • nominalne wydajności pompowania: 40l/min
  • zalecane pojemności oczyszczanych układów: ≤ 6000
  • zakres lepkości kinematycznej filtrowanej cieczy: 2,0 .. 220,0 mm2/s
  • zakres temperatury pracy: 0 .. +80
  • maksymalny zakres pracy filtra – ciśnienie: 3,0 bar
  • minimalne ciśnienie na wejściu: -0,05 MPa
  • napięcie zasilania: 380V
  • częstotliwość napięcia zasilającego 50Hz
  • moc silnika: 2,2kW
  • prędkość obrotowa silnika: 1420 obr/min
  • masa: 120kg
  • wymiary gabarytowe: 650x750x1100mm
  • funkcje: filtrowanie, przetłaczanie

Mobilny bocznik filtracyjny wykonany jest w zwartej zabudowie cechującej się łatwością montażu dzięki zabudowie wszystkich elementów na wspólnej ramie jezdnej. 

budowa bocznika mobilnego 5

1. Filtr siatkowy
2. Zawór zwrotny
3. Silnik elektryczny
4. Pompa śrubowa
5. Zawór regulacyjny
6. Wyłącznik ciśnieniowy
7. Zawór odcinający
8. Filtr włókninowy (komora filtracyjna)
9. Manomert (ilościowy wskaźnik zanieczyszczenia filtra)
10. Autommatyczne odpowietrzanie układu
11. Rewizyjny zawór spustowy
12. Zawór bezpieczeństwa
13. Skrzynka elektryczna

 

Stosowane wkłady filtracyjne:

W urządzeniu typu MBF-II/300-100 można stosować następujące wkłady filtracyjne:

  • WF-W-200/01-920/145
  • WF-W-200/03-920/145
  • WF-W-400/05-920/145
  • WF-W-400/10-920/145
  • WF-W-400/25-920/145

W każdym z tych typów agregatów instaluje się 2 wkłady filtracyjne (ten typ agregatu posiada 2 pracujące równolegle komory filtracyjne).

 

Mobilny bocznik filtracyjny MBF-II/300-120 jest urządzeniem przeznaczonym do usuwania z olejów (turbinowych, sprężarkowych, przekładniowych, hydraulicznych i innych) zanieczyszczeń mechanicznych. Może także służyć do uzupełniania filtracyjnego lub usuwania – wypompowywania z pominięciem komory filtracyjnej oleju w układzie, przy którym pracuje.


Budowa i konstrukcja bocznika filtracyjnego MBF-II/300-120 umożliwia pracę w trzech różnych wariantach:

  • filtrowanie bocznikowe układu olejowego (off – line),
  • uzupełnianie filtracyjne układu olejowego,
  • wypompowywanie oleju z pominięciem komory filtracyjnej.

Urządzenie należy stosować:

  • do olejów świeżo zakupionych, filtrując olej podczas napełniania systemów olejowych urządzeń
  • jako urządzenie niezależnie filtrujące olej w układach urządzeń i maszyn pracujących w ruchu ciągłym w specjalnych warunkach,
  • jako urządzenie pompujące oleje z pominięciem komory filtracyjnej olejów przepracowanych.

Mobilny bocznik filtracyjny może być wykonane na indywidualne potrzeby odbiorcy. W związku z tym konfiguracja i rodzaj zamontowanych urządzeń może być różna.

Parametry techniczne urządzenia

  • nominalne wydajności pompowania: 120l/min
  • zalecane pojemności oczyszczanych układów: ≤ 12000
  • zakres lepkości kinematycznej filtrowanej cieczy: 2,0 .. 220,0 mm2/s
  • zakres temperatury pracy: 0 .. +80
  • maksymalny zakres pracy filtra – ciśnienie: 3,0 bar
  • minimalne ciśnienie na wejściu: -0,05 MPa
  • napięcie zasilania: 400V
  • częstotliwość napięcia zasilającego 50Hz
  • moc silnika: 3~2,2kW
  • prędkość obrotowa silnika: 2820 obr/min
  • masa: 155kg
  • wymiary gabarytowe: 880x910x1400mm
  • funkcje: filtrowanie, przetłaczanie

Mobilny bocznik filtracyjny wykonany jest w zwartej zabudowie cechującej się łatwością montażu dzięki zabudowie wszystkich elementów na wspólnej ramie jezdnej. 

budowa bocznika mobilnego 5

1. Filtr siatkowy
2. Zawór zwrotny
3. Silnik elektryczny
4. Pompa śrubowa
5. Zawór regulacyjny
6. Wyłącznik ciśnieniowy
7. Zawór odcinający
8. Filtr włókninowy (komora filtracyjna)
9. Manomert (ilościowy wskaźnik zanieczyszczenia filtra)
10. Autommatyczne odpowietrzanie układu
11. Rewizyjny zawór spustowy
12. Zawór bezpieczeństwa
13. Skrzynka elektryczna

 

Stosowane wkłady filtracyjne:

W urządzeniu typu MBF-II/300-120 można stosować następujące wkłady filtracyjne:

  • WF-W-200/01-920/145
  • WF-W-200/03-920/145
  • WF-W-400/05-920/145
  • WF-W-400/10-920/145
  • WF-W-400/25-920/145

W każdym z tych typów agregatów instaluje się 2 wkłady filtracyjne (ten typ agregatu posiada 2 pracujące równolegle komory filtracyjne).

 

  • The unit can be configured and equipped as per the customer needs. We can also manufacture the unit according to explosion-proof standards.
    5. Mobilny bocznik filtracyjny

  • Filtration units allow to carry out the following operations:
    • bypass oil cleaning in the course of regular machine operation
    • pumping used oil out of machines with the filtration chamber bypassed
    • zalewanie układów olejowych świeżym olejem

  • A specially designed union piece of the bypass filtering unit allows to connect easily and flexibly to different oil reservoirs via their oil refills plug without machine stoppage. At the same time, it secures correct relative position of suction and pressure hose tips.

  • Our devices guarantee operational cleanliness of machine oil systems consistent with requirements of ISO standards.

  • Detailed technical specifications of mobile bypass filtration units together with dimensioned drawings can be found in the download section.