fbpx

Configuring the units for determining cleanliness class of oils and other working fluids.

We offer also analytical services in scope of other oil parameters in co-operation with scientific institutions accredited to perform analyses listed in the following table.kompletacja zestawow

Analyses of basic physicochemical parameters:

  • Density at temperature 20°C (g/dm³) - Performed as per standard PN-ISO 3675:1997
  • Viscosity at temperature 40°C (mm²/s) - Performed as per standard PN-81/C-04011
  • Flash point (°C or K) - Performed as per standard PN 82/C-04008/
  • Water contents — distillation method - Performed as per standard PN-83/C-04523
  • Acid number (mg KOH/g of liquid) - Performed as per standard PN-81/C-04066
  • Cleanliness class (microscopic method ISO 4407) - Performed as per standard PN - ISO 4407
  • Corrosion on copper/steel plate at T = 120°C - Performed as per standard PN-85/C-04093

Świadczymy także usługi analityczne innych parametrów oleju przy współpracy z instytutami naukowymi posiadającymi akredytacje na wykonywanie analiz wymienionych poniżej.
kompletacja zestawow

Analyses of other oil parameters:

  • Water content —K. Fischer method, sensitivity up to 5 ppm - As per standard PN-81/C-0495
  • Emulsifying power - As per standard PN-86/C-04093
  • Determination of the demulsification number - As per standard PN-79/C-04110
  • Resistance to oxidation - As per standard ASTM D2272 (RBOT)
  • Foaming power - As per standard PN-85/C-04055
  • Oxidation inhibitor content - As per standard spektrometria IR
  • Air releasing power at 50°C - As per standard PN-79/C-04174

When sending a sample, please attach the type of analyses required and attach (or send separately by facsimile or e-mail) the following details concerning the sample (if available):kompletacja zestawow   

  • oil type (or name) and manufacturer,
  • oil usage time,
  • machine or device in which the oil is used,
  • capacity of the oil reservoir,
  • sample taking date.

The container (a plastic bottle or a glass jar) should be clean and dry. Do not forger to protect the container with the sample against mechanical damage in transportation.